Daily Maintenance Steps Of Liquid Silicone Machine

1. To replace the rubber type, the pipeline needs to be cleaned. At this time, first close the supply valve, open the supply valve, and after the remaining material in the barrel is discharged, close the supply valve, open the supply valve, pour the cleaning solvent into the barrel, activate the body, and rinse the solvent according to the usual operation method.

2. The air pressure and air intake are abnormal. If moisture is found, please remove the moisture in the pressure regulating filter and check whether the air pressure source is abnormal. Before using the silicone rubber dispenser in large quantities, please try a small amount to master the use technology of the product to avoid mistakes. When there is no problem in the test, please use a double-drop glue machine or a double-liquid glue filling machine to vacuumize the rubber to defoam the rubber, remove the bubbles generated during stirring, and use it after standing for 10-20 minutes. The bubbles generated during mixing Excluded immediately, the more rubber is mixed in.

3. The machine part should be wiped regularly to increase the service life. The more the amount of adhesive mixed, the faster the reaction and the faster the curing speed. Therefore, the adhesive must be properly matched according to the actual production situation. The mixture will be wasted. Eliminate accidents and improve production efficiency. Now liquid control technology and distribution equipment are widely used in various production fields of modern industry.

4. When the machine is out of use for a long time, the power must be unplugged. This not only prolongs the life of the machine, but also saves a lot on electricity bills. With the ever-changing industrial development needs, liquid control technology and distribution equipment have also developed to ultra-high precision control and diversification and specialization. Container bag wholesale products are easily affected by ultraviolet rays and aging during use. Therefore, in the production of products, it is necessary to conduct anti-ultraviolet inspections to ensure good use effects. At present, the inspection volume of liquid silicone machines is gradually increasing. improve.