Matters Needing Attention When Using Liquid Silicone Injection Molding Machine

1. Before use, in order to prevent accidents in the production process, the necessary inspection of the liquid silicone injection molding machine should be carried out. Check the electrical control box for water or oil entry. If the hairline electrical equipment is wet, do not start it, the electrical equipment should be dried before starting.

2. Before operation, check whether the supply voltage meets the standard. Check the emergency stop switch, check whether the front and rear safety door switches are normal, and check whether the rotation directions of the motor and the oil pump are consistent. Before using the liquid silicone injection molding machine, check whether the cooling pipes are unobstructed, and pass the cooling water to the oil cooler and the cooling water jacket at the end of the barrel.

3. During use, educate employees to use the liquid silicone machine in strict accordance with the usage specifications to avoid industrial accidents or machine damage due to human reasons.

4. Maintenance after use, in order to make the liquid silicone injection molding machine inject qualified silicone products. After the liquid silicone injection molding machine is used, corresponding maintenance and maintenance should be carried out to prolong its service life.