Views: 0 Author: Site Editor Publish Time: 2023-12-23 Origin: Site
1. Before using the liquid silicone machine, the necessary inspection must be carried out on the injection machine. Check whether there is water and oil in the control box of the electrical equipment. If the electrical equipment on the hairline is damp, there is no need to turn on the power supply. After drying the electrical equipment, turn on the power supply. Check whether the supply voltage meets the regulations. Check the emergency stop switch again, check whether the front and rear safety doors are open and closed normally, and whether the rotation directions of the motor and the oil pump are the same. Before operating the liquid silicone machine safely, check whether each cooling pipe is smooth, and put the oil cooler and the cooling water set at the end of the barrel into the cooling water.
2. During the use of the liquid silicone machine, educate employees to strictly abide by the operating specifications to prevent industrial accidents and mechanical damage caused by human factors.
3. The maintenance of the liquid silicone machine after use, in order to make the liquid silicone machine produce qualified silicone products and maintain a long-term use period. The injection machine should be maintained after use.